We’ll have your shower glass looking like it’s just rolled off the factory line – at a fraction of the cost of replacing it.
The shower is one of the most used areas of your home, meaning that over time, shower glass can become etched by the minerals in the water supply. While you may think that replacing the glass is your only option, you can save money on replacement costs and opt for shower glass restoration instead.
At GroutPro, we specialise in shower glass cleaning and restoration, removing stubborn limescale or minor water marks, and protecting your glass with Enduroshield – a durable shower glass coating to keep it cleaner for longer.
Looking to restore and protect your shower glass? We’re here to help.
Minerals in the water supply such as lime, iron oxide, and calcium will fuse to the glass when water droplets are left to dry on the surface after each shower. This results in small water marks appearing that eventually cover the entire panel, leaving the glass cloudy. These minerals are unable to be removed by daily cleaning products
Shower glass that is not cleaned, rinsed, and dried off regularly will also build up deposits of soap, shampoo, and body oils, that can form an unsightly layer. General spray and wipe cleaning products available at supermarkets are unable to remove these stubborn build-ups.
Spray and walk away type products can cause damage to other surfaces as they are left at full strength for long periods of time.
Untreated glass allows water droplets to hang on to the glass surface, which then leaved behind the minerals as the water evaporates during the day. Treating the glass ensures that water is unable to stick to the glass.
Conditions apply.
This can depend on the age and type of the glass, and what chemicals have been used to try to keep it clean. Our quoting process will determine if the glass can be restored or not.
A professional glass coating like Enduroshield Professional can last for years, unlike DIY coatings that require reapplication every few months. It forms an invisible barrier that repels soap scum, water stains, and mineral buildup, helping to keep your shower glass cleaner for longer.
To keep your shower glass clear, we recommend using a non-abrasive cleaner and a soft cloth or squeegee after each use. Avoid harsh chemicals, scouring pads, or acidic cleaners, as these can damage the surface and create more scratches. For long-term protection, a shower glass coating like Enduroshield Professional is best.
Water spotting is caused by minerals such as calcium, lime, and iron in the water supply sticking to the microscopic pores of the glass. When water droplets are left on the surface, they evaporate, leaving behind these stubborn stains. Over time, these minerals build up and block the clarity of the glass.
Removing them requires specialist abrasive products and professional techniques to restore up to 80 - 90% shower glass clarity. However, in some cases, severely etched glass may not be fully restorable. The best way to minimise water marks is to wipe down your glass after every shower.
GroutPro provides a range of services to keep your bathroom and other tiled areas looking great.
